Damp in the home is best summed up as water or moisture getting in where it should not be.!

Moulds will grow when provided with moisture and nutrients. High moisture levels can be the result of water coming in from the outside, through the floor, walls or roof; or from plumbing leaks; or moisture produced by the people living in the home, daily activities like bathing, washing clothes or cooking.

Anti-Mould Additive

Description: Additive for immediate and long-term protection against mould, mildew, yeasts and algae formation. Does not effect the colour or performance of mixed materials.

 Areas of use: Can be added to waterbased paints, wallpaper pastes, fillers, grouts and other similar repair/building materials which are mixed with water. Can also be used as a surface protector on all absorbent mineral surfaces such as plaster, plasterboard, stone, concrete, masonry etc.

 Application: Dispersion paints: Add 25ml to 1lt of paint and stir well. Ensure paint does not thicken.Mortar and plaster:Add 500ml to 10lt of water and mix well. Then mix with the plaster or mortar in the usual manner. Wallpaper paste: Add 250ml to the gauging water for a standard pack and mix well. Then mix with the paste in the usual manner. For surface protection: Mix 250ml with 5-7lt of water. Brush on 2 coats and leave to dry completely (approx 60 mins) before any further treatment or work.

 Important: Always check first for product compatibility. Prepare a sample mix in paint and ensure it maintains it’s original consistency and does not thicken.

 Ingredients: Per 100g: 0,06 g Mixture of 5-chlor-2-methyl-2H-isothiazol-3-on and 2-methy-2H-isothiazol-3-on, 0,01 g 2-octyl-2H-isothiazol-3-on

  Coverage:1lt is sufficient for 40lt of paint. To reduce the risk of mould in the home always
  • Find and fix water leaks
  • Clean and maintain the home regularly
  • Discard clutter and excess stored materials
  • Ventilate areas where moisture or humidity levels are high
  •  

Hazard Statements: Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction.

Safety Instructions:
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid vapours. Wear protectivegloves/protective clothing/ eye protection/ face protection.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin Irritation Occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Dispose of contents/ container in accordance with local/ regional/ national/ international regulations.
Additional Specifications
Product contains:
Mixture of 5-Chlor-2-methyl-2H-isothiazol-3-on and
2-Methyl-2H-isothiazol-3-on (3:1), 2-2-Octyl-2H-
isothiazol-3-on
MouldX Product