Anti-Mould Stain Block
Areas of use: For mould and mildewed wall and ceiling surfaces in living areas and damp locations. Remove existing mould and mildew before application. Not suitable for permanently damp gypsum plaster and plasterboards.
Pre-treatment: Remove any existing growth using MouldX Mould Remover. Use MouldX Repair Filler for any necessary repair work. The surface must be stable and free from dust, grease and other separating agents prior to application.
Application: Stir well before use and apply with a brush or roller. For secure protection, apply generously and if necessary apply a second coat once the first is completely dry. In normal conditions, drying time is approximately 8 hours.
Important: Do not apply wallpaper or paint until the treated areas are completely dry. Clean tools immediately after use with white spirits. If surfaces are exposed to moisture over a long period of time, consult an expert.
Ingredients: 5-15% oxygen –based bleach 5% nonionic tensides, phosphonate, Ready-to-use disinfection agent Per 100g: 11g hydrogen peroxide BauA-Reg.Nr.: N-32695
Coverage: 4-5m² per 750ml Expiry date: See printed date